Underglow Max Installation Guide

Underglow Max Installation Guide

Transform your ride with Underglow Max. Install 14,256 lumens of vibrant glow in seven simple steps. From precise strip placement to secure wiring, this guide ensures a flawless, showroom-worthy finish. Add Stealth Strip for a concealed, polished look. Your ride, reimagined. Light up the night.

Steps:

Unpack & Test: Lay out front, side, and rear strips, ensuring arrows point rearward. Test before mounting.

Clean: Degrease and wipe surfaces with rubbing alcohol; dry thoroughly.

Mount: Peel adhesive, press strips 2” from edges, following vehicle contours.

Secure Gaps: Use clear silicone for gaps or missing surfaces; add hangers only if needed.

 

Wire: Connect receiver box in engine bay, secure wires with zip ties, avoid heat sources.

Heat: Cure adhesive with a heat gun 1-2” away for a lasting bond.

Customize: Power on, adjust colors and modes via Banlanx app (Apple) (Android) or remote.

Optional Stealth Strip: Install 1” in front of LEDs using same cleaning and heating steps.

Click here to order Underglow Max now!


Previous Article Next Article